Description
Eflex SMT Good Bad Unloader
Our Eflex SMT Good Bad Unloader is used to unload the PCB’s out of the production line by pushing them into standard magazine racks, with the peculiarity that if an NG signal (non-good PCB) is sent to the equipment from the previous machine, the pcboard will automatically be transfered to a second rail designated to separate the good PCB’s from the bad ones. The magazines are loaded onto the upper twin platforms and are directly transferred to the lifter platforms, which will go down step-by-step according to a programmed selectable pitch (to load each PCB one by one into the racks). As soon as the lifter reaches the bottom position (whatever it is the good or bad pcb rail), the full rack will be transferred back into the lower exit platform, so it can be removed from the line to be unloaded.
We have several models according to the maximum width of the pcb that they will work with, all of them provided with a visual easy-to-handle membrane button panel.
Specification
- Model – LS-305SD3BM
- Machine size (mm) – (L)1970x(W)1538x(H)1251
- PCB size (mm) – 50×50~(L)330x(W)250
- Magazine size (mm) – (L)355x(W)320x(H)560
- Conveyor direction – Left to right (standard) or right to left (optional)
- Conveyor height – 950+/-30mm
- Power – AC220V/50-60Hz
- Air supply – 4-6 bar
- Air consumption – 10 l./min max
- Control system – PANASONIC PLC and Omron sensors
- Control panel – Buttons Membrane
- Selectable pitch – 10, 20, 30 or 40mm
- Transport chain – Nylon black flat chain
- SMEMA – SMEMA compatible as default
- Net weight – 500 Kg 720 Kg
- Gross weight – 550 Kg 770 Kg
If you require any further information relating to this product in more detail please do not hesitate to contact us or call us on +44 1260 270950
