Description
Burst & Zick CO66M Taped Radial Cutting Device
Burst & Zick CO66M Taped Radial Cutting Device is designed to cut the leads of tapes radial leaded components to the required length and is essentially a motorised version of the CO66H. The Burst & Zick CO66M machine is extremely simple to use; the operator loads the taped radial component into the reel holder and then adjusts the dial for the desired lead length. The drive is set to the required processing speed and switched on and the components are cut to length and then deposited in the receptacle. The Burst & Zick CO66M requires little if no maintenance and is built to the same exacting German engineering standards as the more expensive machines within the Burst & Zick range of component forming machines. The machine is small and portable and is ideal and quick to set up at any work station allowing flexibility within the work place.
Features
- Simple hand operation
- Robust motor drive
- High throughput
- Portable
Specification
| dimension | 530 x 310 x 310 mm |
| – weight | approx. 15 kg |
| – power supply | 230 V / 50 Hz / 100 W |
| – pitch | arbitrary |
| – tape holepitch | 12,7 mm and 15 mm |
| – lead Ø | max. 0,8 mm |
| – cut length | 2,5 mm and more |
| – operation | by engine (continuously variable) |
| – production rate | 35.000 pcs/h |
For applications that require the removal of any tape tolerances we offer the CO66MA – please contact us for more details
Please contact us should you require any further information relating to component forming.
