Description
Burst & Zick C 042 Axial Preforming Device Goal Post Form
Burst & Zick C 042 Axial Cutting and Forming Device is designed to cut, form and bend the leads of axial components. By the use of interchangeable tool sets a variety of form configurations can be achieved with this device. The change can be done easily and secured in less than two minutes. The settings will be displayed on the scale of the device. The form of the leads are tooling-specific and therefore tools are produced to meet customer requirements.
The components are hand fed into the machine and the component body is cantered between the bending anvils. After depressing the Foot pedal the component leads are clamped on both sides. The leads are then cut to length and depending on the form shape the required lead features are formed in the leads at this time. After that, the leads are bend to the 90° configuration. The processed component is then ejected to the front of the device.
Features
- Consistent forming due to custom tooling
- 2 versions CO42 (standard lead diameter components), CO42S (larger lead diameter components)
- Pneumatic power
- Foot pedal control
Specification
| dimension | 300 x 500 x 210 mm |
| – weight | approx. 8 kg |
| – compressed air | 4 to 6 bar |
| – min. pitch | C 042: 10 mm C 042/S: 12,5 mm |
| – max. pitch | C 042: 70 mm C 042/S: 70 mm |
| – lead Ø | C 042: max.0,8 mm C 042/S: max. 1,3 mm |
| – components | loose or belted |
| – operation | manual via pneumatic Foot pedal |
| – production rate | 2.500 pcs/hr |
Please contact us should you require any further information relating to component forming.
